There is a simple technique by which one can check if earthing at home is working properly.
1. Take a bulb with a holder connected with two wires
Simply connect a bulb to a lamp holder with two cables as live and neutral and open the main switch where your earth wire is connected then put one of the wire to the earth bar and the other to a live wire bar of the main switch, the bulb will light up if the earth is effective since its grounded it’s also acts as a neutral but it’s effectiveness as a neutral is minimal as compared to the neutral from the substation. So, this is the simplest way to test your earth at homes but you must also check if this earth is being distributed to your power sockets and all the lighting systems.
Click to View the complete process https://www.wikihow.com/Check-Earthing-at-Home
Any electrical equipment requires earthing for the following three reasons:
Earthing testing is a range of investigations that are performed to acess the safety of the equipment and the personal operating it. The test is conducted with the help of an earth tester or an earth test meter. There are several methods of conducting earthing testing such as:
Earth test meter is used measures:
Earthing of an electrical equipment aims to create an equipotential surface around the equipment to safegauard the equipment in case of any electrical fault and the person operating it. Earth test meter is used to check if the electrical equipment is at same potential with earth or not.
Earthing is essential for all electronic & electrical equipment to ensure safety and prevent potential hazards. Proper earthing helps protect against electrical shocks and ensures that any exposed conductive parts of the appliance remain at a safe voltage level. Proper earthing provides an alternative and easy path for leakage or faulty current to flow.
This means that personnel using the appliances can work safely without the risk of electric shock or injury in the vicinity of the equipment.
Subscribe to Our Newsletter
As per our requirement and request, your company has provided the knowledge and installation of 5 nos. of maintenance free earthing stations based on Marconite (conductive concrete based earthing) at our Electron Beam Centre, Kharghar, Navi Mumbai. Out of these 5 earthing pits, 4 nos. are connected in the parallel network to achieve an earth pit resistance of 0.65Ω which is required for our HV pulse power applications. We are glad to get these maintenance free earthing stations having less than 1 ohm.
Accelerator & Pulse Power Div., BARC
We adopted Marconite Conductive Concrete technology for treated earth pits 1 X 700 MW Ballary Thermal Power Project at Ballari of Karnataka Power Corporation Ltd. The land of the project is rocky terrain. The design was approved by our engineering group PEM – Noida and the client and could be able to achieve the desired earth resistance as per client’s requirement.
Electrial & CI PSSR
Some of Our Prestigious
Intertech’s cutting-edge qualitative services have developed trustworthiness & goodwill among its clients. Marconite earthing solutions are developed to cater to…
Installations
Happy Customers
of Earthing
Solution
Channel Partners
Across India
Direct Share or Chat on Whatsapp
Enter Country Code Without (+)